Installing vinyl siding over wood siding is a great way to change the look of your home. However, you must be cautious. The first step is to make sure that your siding will be able to withstand the elements. You will need to install a moisture barrier. This can be done with a polyethylene sheet. The next step is sealing the seams of your moisture barrier with vapor barriers tape. The last step is to attach the moisture barrier to the furring strips, which will hold the siding in its place.
After you've assessed the condition and repaired any damage to your siding, it's time to make adjustments to the doors or windows in the house. Casement windows may need to be enlarged due to their new thickness. If your windows have a little bit of set-in, you will need to remove the trim.
If you have any mold, rot, or decay on your wood siding, it should be removed. You'll also have to replace the siding by fresh boards. You can hire a contractor to repair siding that has been damaged. You can leave the siding in place if it is not structural.
Before you start, find out how much wood sheathing has been attached to your house. Ideally, you'll need to remove at least a couple of inches of this wood. You can use a measuring tape to estimate the length and width of the sheathing. The siding panels should be placed on a flat surface so that they don't overlap too much. You can also use rigid foam to protect any cracks in the walls.
You'll need to remove any old trim, windows, and doors before you can start to install vinyl siding over your existing wood siding. Also, make sure your house is level. This makes it easier for siding panels to be aligned at corners.
To hold the vinyl siding panels in their place, you will need to create a starter strip. This is typically a vertical strip made of lumber and should be placed about one inch above the siding. It's recommended to place the strip in a 16-inch space. A starter strip can be attached to your wall by attaching nails in the slots. Drive the nails into the slot and leave a 1/4 inch gap at each end.
Vinyl siding is best installed over wood siding. It's important not to damage your sheathing. A contractor who has expertise in installing vinyl siding will be able to help you if you have any questions. It is important to prepare for possible problems such as outdoor light fixtures or gutters.
FAQ
Can I do the whole renovation myself?
You can do it yourself so why pay someone when you could save time and money?
It doesn't really matter how much you love DIY. There will always be times when you just can't do it. You might not be able control many of the variables.
You might discover that the wiring in your home is not up to date. In this case, you'll need to hire an electrician to ensure that your electrical system works safely and reliably.
Be aware that structural damage might be too costly for you to repair during the renovation.
It is possible that you don't have the right tools or the knowledge to do the job correctly. A plumber's snake is an instrument that can be used to unclog pipes.
You must also follow plumbing codes to ensure that a licensed plumber is working on your project.
It is important to understand your capabilities before embarking on such a large task.
If you are unsure whether you can tackle the job yourself, ask for help from friends and family members who have done similar projects before.
They can provide advice on the best steps to take and places to find more information.
How do I choose a good contractor?
When choosing a contractor, ask friends and family members for recommendations. You can also look online for reviews. Look online for reviews to ensure the contractor you choose is experienced in the construction area you are interested. Check out references and ask for them to provide you with some.
You can live in a house while it is being renovated.
Yes, I can live in my house while renovating it.
Is it possible to live in a house with renovations going on? The length of construction takes will determine the answer. If the renovation takes less than two months, then you can live in your house while it is being built. You cannot live in your house while the renovation process is ongoing if it lasts more than two years.
The reason why you should not live in your home when there is a major construction project going on is because you might get hurt or even killed due to falling objects from the building site. Noise pollution and dust from heavy machinery on the job site could also be a problem.
This is especially true for multi-story houses. If this happens, the sound and vibration caused by the construction workers can cause significant damage to your home and contents.
You'll also need to cope with the inconvenience of living in temporary housing while your house is being renovated. You won't have all the amenities of your home.
While your dryer and washing machine are being repaired, you won't be able use them. You will also have to put up with the smell of paint fumes and other chemicals as well as the loud banging sounds made by the workers.
All these factors can lead to stress and anxiety among you and your family members. It is therefore important to plan ahead so that you don't end up feeling overwhelmed by the situation.
Research is key when you are considering renovating your home. It will save you money and help you avoid costly mistakes.
You can also consider professional advice from a trusted contractor to ensure smooth running of your project.
How much does it set you back to renovate your house?
Renovations usually cost between $5,000 and $50,000. Most homeowners spend between $10,000-$20,000 on renovations.
How many times should my furnace filter need to be changed?
The answer will depend on how often your family is going to use your heating system. You might consider changing your filter less frequently if you are likely to be away from your home for extended periods during the cold months. If you are not likely to leave your house for long periods of time during cold weather months, you might be able make more frequent changes.
A typical furnace filter lasts approximately three months. This means that you should replace your filters every three months.
You can also consult the manufacturer's recommendations regarding when to change your filters. While some manufacturers recommend replacing your filter once per heating season, others recommend waiting until there is visible dirt buildup.
Do you prefer to do walls or floors first?
The best way of starting any project is to determine what you want. It is crucial to plan how you'll use the space, what people will use it for, and why. This will help decide if you want flooring or wallcoverings.
If you have decided that you want to create an open plan kitchen/living area then you may choose to install flooring first. You can also choose wall coverings if you want to make the room private.
Statistics
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
- They'll usually lend up to 90% of your home's "as-completed" value, but no more than $424,100 in most locales or $636,150 in high-cost areas. (kiplinger.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
External Links
How To
How do I plan a whole-house remodel?
Planning a home remodel takes planning and research. Before you start your project, there are many factors to consider. The first thing to do is decide what kind of home renovation you want. There are many categories that you could choose from: kitchen, bathroom or bedroom; living room or dining room. After you decide which category you want to work on, figure out how much you can afford to spend on the project. If you are new to working in homes, budget at least $5,000 for each room. If you have some experience, then you might be able to get away with less than this amount.
Once you've determined the amount of money you can spend, you need to decide how large a job you want. You won't be capable of adding a new floor, installing a countertop, or painting the walls if your budget is limited to a small remodel. On the other hand, if you have enough money for a full kitchen renovation, you can probably handle just about anything.
Next, find a contractor that specializes in the project you are interested in. This will ensure you get quality results and save you a lot of hassle later. Once you have found a reliable contractor, it is time to start gathering supplies and materials. You might need to make everything from scratch depending upon the size of your project. However, you won't have to worry about finding the exact item you are looking for in the many pre-made shops.
Now it's time for you to start planning. You will first need to sketch out an outline of the areas you plan to place appliances and furniture. Next, plan the layout. You should leave enough space for electrical outlets and plumbing. Make sure to position the most visited areas close to the front door. Visitors can also easily access them. You can finish your design by choosing colors and finishes. Avoid spending too much on your design by sticking to simple, neutral colors and designs.
Now that your plan is complete, it's time you start building! Before you start any construction, be sure to check the local codes. While some cities require permits, others allow homeowners to construct without them. You will need to first remove all walls and floors that are not required for construction. To protect your flooring, you will lay plywood sheets. You will then attach or nail pieces of wood together to make the cabinet frame. The frame will be completed when doors and windows are attached.
After you're done, there are still a few things you need to do. For example, you'll probably want to cover exposed pipes and wires. For this, you will use plastic sheeting or tape. Also, you will need to hang mirrors or pictures. Be sure to tidy up your work space at all costs.
If you follow these steps, you'll end up with a beautiful, functional home that looks great and saves you lots of money. Now that you are familiar with how to plan a whole home remodel project, it is time to get started.